Tweet
Hallo
Ik ben op zoek naar 2 nieuwe versterkers voor mijn topjes (jbl eon 1500 225W rms bij 8Ohm), en bleef mijn oog vallen op de volgende 3 versterkers
Mijn budget is ongeveer 350,- per versterker
welke versterker zou hier het meest geschikt voor zijn?
dB Technologies HPA 1000
dBTechnologies’ HPA series power amps deliver high performance and quality at an astonishingly affordable price. Designed for professional use in touring racks as well as for fixed installation, the series comprises four Class-(HD) models that deliver 2x 510 W/RMS to 2x 1050 W/RMS at 4 ohms. Featuring Class-(HD) technology with and weighing just 14 kg, the flagship HPA 3100L power amp delivers up to 3400 W/RMS output. It comes with a PFC switched-mode power supply.
Engineered for utmost ease of use, these amps offer connection options - XLR inputs for patching in signals as well as Speakon ports for connecting speaker systems. What’s more, their extensive protective circuits ensure reliable, safe operation.
Specifications.
Class-(HD) technology to minimize thermal load and maximize efficiency
Fast response and dynamic sonic image with lowest distortion factors
Easy to configure in mono/stereo/bridge modes
Extensive protective circuits ensure high reliability and operating safety
Front panel signal and clip and protect LED indicators
Operable at 2 ohms
Speakon connectors
2 HU, 19“, low weight for easy transportation
Switchable limiter
Technical data.
Power output, stereo, RMS @ 2 ohms -
Power output, stereo, RMS @ 4 ohms 2x 510 W
Power output, stereo, RMS @ 8 ohms 2x 330 W
Power output, bridged, RMS @ 4 ohms -
Power output, bridged, RMS @ 8 ohms 1x 1020 W
Amp class Class-HD
Power supply Conventional
Frequency response 20 - 2000 Hz
THD @ 1 kHz 0.05%, 1 dB below clip
Damping factor @ 8 ohms >300
Slew rate 50V/μs
Signal-to-noise ratio 105 dB
Input sensitivity 26 dB / 32 dB / 1.4 V
Input impedance 20 kOhms bal./
10 kOhms unbal.
Protective circuits Temp., DC,
RFI, short-circuit
Inputs 2x XLR male/female
Outputs 2x Speakon
Cooling Temperature- Temperature controlled fan
Dimensions (W x H x D) 482 x 89 mm x 402
Rack height 2 HU
Weight 15 kg
€330,-
Alto Mistral 1500
Powerful and musical! Mistral amplifiers are based on a very musical sophisticated AB design and are available in a wide range of power from 400 to 2800 watts. These amps include a soft start, a signal limiter (which can be switched off) a variable speed low-noise fan and a sophsiticated LED meter display monitors the amplifiers operation status in real time. The Mistral Series amplifiers also include an LED meter for every channel and functions monitored include: Operation, Limiting, Clipping and Protection modes. All Mistral toroidal transformers include an independent secondary rail for better stability and dynamic range.
‧RMS (EIAJ) power: 2×320W @8Ω; 2×540W @4Ω; 1×1000W @8Ω
‧Binding post and Neutrik Speakon output connectors
‧Smart-design protection system
‧High-current toroidal transformer
‧Balanced XLR inputs/ parallel outputs
‧Variable speed cooling
‧4 LEDs for operation/protection, limit, power on and clip
‧Dimensions (W×D×H): 483×400×89mm (19"×15.9"×3.5”)
‧Weight: 13kg (28.7 lb)
€359
QSC GX3
2x 500W/4Ohm
2x 350W/8Ohm
Input: XLR, RCA and 1/4" Jack
Out: Speakon Combo for 1/4" Jack and Speakon
weight: 11,5 kg
€333,-
Ik ben op zoek naar 2 nieuwe versterkers voor mijn topjes (jbl eon 1500 225W rms bij 8Ohm), en bleef mijn oog vallen op de volgende 3 versterkers
Mijn budget is ongeveer 350,- per versterker
welke versterker zou hier het meest geschikt voor zijn?
dB Technologies HPA 1000
dBTechnologies’ HPA series power amps deliver high performance and quality at an astonishingly affordable price. Designed for professional use in touring racks as well as for fixed installation, the series comprises four Class-(HD) models that deliver 2x 510 W/RMS to 2x 1050 W/RMS at 4 ohms. Featuring Class-(HD) technology with and weighing just 14 kg, the flagship HPA 3100L power amp delivers up to 3400 W/RMS output. It comes with a PFC switched-mode power supply.
Engineered for utmost ease of use, these amps offer connection options - XLR inputs for patching in signals as well as Speakon ports for connecting speaker systems. What’s more, their extensive protective circuits ensure reliable, safe operation.
Specifications.
Class-(HD) technology to minimize thermal load and maximize efficiency
Fast response and dynamic sonic image with lowest distortion factors
Easy to configure in mono/stereo/bridge modes
Extensive protective circuits ensure high reliability and operating safety
Front panel signal and clip and protect LED indicators
Operable at 2 ohms
Speakon connectors
2 HU, 19“, low weight for easy transportation
Switchable limiter
Technical data.
Power output, stereo, RMS @ 2 ohms -
Power output, stereo, RMS @ 4 ohms 2x 510 W
Power output, stereo, RMS @ 8 ohms 2x 330 W
Power output, bridged, RMS @ 4 ohms -
Power output, bridged, RMS @ 8 ohms 1x 1020 W
Amp class Class-HD
Power supply Conventional
Frequency response 20 - 2000 Hz
THD @ 1 kHz 0.05%, 1 dB below clip
Damping factor @ 8 ohms >300
Slew rate 50V/μs
Signal-to-noise ratio 105 dB
Input sensitivity 26 dB / 32 dB / 1.4 V
Input impedance 20 kOhms bal./
10 kOhms unbal.
Protective circuits Temp., DC,
RFI, short-circuit
Inputs 2x XLR male/female
Outputs 2x Speakon
Cooling Temperature- Temperature controlled fan
Dimensions (W x H x D) 482 x 89 mm x 402
Rack height 2 HU
Weight 15 kg
€330,-
Alto Mistral 1500
Powerful and musical! Mistral amplifiers are based on a very musical sophisticated AB design and are available in a wide range of power from 400 to 2800 watts. These amps include a soft start, a signal limiter (which can be switched off) a variable speed low-noise fan and a sophsiticated LED meter display monitors the amplifiers operation status in real time. The Mistral Series amplifiers also include an LED meter for every channel and functions monitored include: Operation, Limiting, Clipping and Protection modes. All Mistral toroidal transformers include an independent secondary rail for better stability and dynamic range.
‧RMS (EIAJ) power: 2×320W @8Ω; 2×540W @4Ω; 1×1000W @8Ω
‧Binding post and Neutrik Speakon output connectors
‧Smart-design protection system
‧High-current toroidal transformer
‧Balanced XLR inputs/ parallel outputs
‧Variable speed cooling
‧4 LEDs for operation/protection, limit, power on and clip
‧Dimensions (W×D×H): 483×400×89mm (19"×15.9"×3.5”)
‧Weight: 13kg (28.7 lb)
€359
QSC GX3
2x 500W/4Ohm
2x 350W/8Ohm
Input: XLR, RCA and 1/4" Jack
Out: Speakon Combo for 1/4" Jack and Speakon
weight: 11,5 kg
€333,-
Comment